Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Polaris?
Panel replacement in Polaris typically costs $250 – $500 for a single section, including the panel and labor. That estimated range reflects what we see across Polaris homes, from the newer builds near the Polaris Fashion Place corridor to older garages off Worthington Road, and the written estimate sets the final price once we’ve seen the door.
Most single-panel jobs land closer to the middle of that range. A single-car door will usually come in lower than a double-car door, and a plain steel panel costs less than a carriage-house style with windows. If you’re here because one bent or dented section is ruining the look of an otherwise solid door, that’s exactly the kind of repair garage door repair in Polaris handles, and it’s often finished in one appointment. Call (833) 842-9208 for a free estimate.
Key Takeaways
- Typical panel replacement cost in Polaris: $250 – $500 for one section.
- The panel type, door size, and whether the section is on the bottom where moisture hits all shift the price.
- We stock parts for major brands like Clopay, Amarr, Wayne Dalton, and Raynor, so many panel jobs don’t need a special order.
- No written estimate costs anything. Call (833) 842-9208 and we’ll give you a range before we ever touch the door.
- Springs, cables, and openers are priced separately. Our spring repair runs $180 – $340 for one spring.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers break down by line item for the Polaris market. These are typical estimated ranges for 2026 rather than promises, and the final price depends on the specific door and panel involved.
| Line Item | Typical Estimated Range |
|---|---|
| Single panel replacement (standard steel) | $250 – $500 |
| Bottom panel replacement (moisture-exposed) | $250 – $450 |
| Panel with windows or decorative inserts | $350 – $500 |
| Carriage-house style panel | $400 – $500 |
| Match-and-order a discontinued panel | $300 – $500 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
| New door installation (full replacement) | $700 – $2200 |
What Drives the Cost Up or Down
Three things move the price the most: the panel itself, the door size, and how hard it is to find a match. A single-car steel door on a common brand is the easy case. A double-car door with custom panels, an older door whose model has been retired, or a section that’s been bent so badly the track is also out of alignment will push toward the top of the range, because panel replacement often turns into a track or roller job once we get the door open.
On the lower end, when the panel is in stock and the door is a standard size from Clopay, Amarr, Wayne Dalton, or Raynor, the job is straightforward. The labor is a couple of hours and there’s no waiting on a special order. That’s the advantage of a specialist who keeps parts on hand instead of a generalist who has to call around.
One thing to keep in mind: if the cost of the panel plus labor starts climbing toward the price of a whole new door, replacing the door might make more sense than patching it. We’ll tell you honestly which side of that line you’re on. Full new door installation runs $700 – $2200, so if you’re looking at a $500 patch on a door that’s already showing its age elsewhere, you may want to think bigger.
What Affects Panel Replacement Pricing in Polaris
Not every panel job prices the same. These are the factors that push the estimate up or down in our area:
- Door size and panel style. A single-car door with a plain steel panel is the most affordable case. Double-car doors, carriage-house designs, and panels with decorative windows all cost more because the panel itself costs more and the labor to install it is greater.
- Bottom panel vs. upper panel. The bottom section of a garage door takes the hit from road spray, snowmelt, and salt tracked in through central Ohio winters. It’s the most common panel to fail and the one most often damaged by a backed-in car. It’s also the panel that tends to need replacement first.
- Brand and availability. If your door is a common Clopay, Amarr, Wayne Dalton, or Raynor model, the panel is usually available without waiting. Older doors or off-brands can require a match-and-order, which adds time and sometimes cost.
- Damage that spread. If the bent panel also knocked the track out of line or bent a roller, that’s an additional charge. Track realignment is $120 – $240 and roller replacement is $110 – $220, and neither should be ignored because a misaligned door wears faster.
- Weather and moisture. Polaris sits in a climate with real freeze-thaw cycles, and a bottom panel that’s been wet and frozen repeatedly can rust along the seams. That rust can work into the door’s bottom edge, so a panel that looked like a simple swap might reveal more work.
- Access and garage setup. A tight overhead clearance, a low ceiling, or a door surrounded by shelving slows the job down and adds labor.
If you’re not sure which of these applies to your door, that’s exactly what a free estimate is for. We have technicians with up to 11 years of experience who can look at the door and tell you what’s actually going on. Call (833) 842-9208.
How to Save on Panel Replacement
Panel replacement is one of the more predictable garage door jobs, so there’s room to keep the bill down. Here’s what helps.
- Fix it early. A small dent or bend is a $250 – $500 panel job. Wait until it warps the track and you’re adding track realignment and roller work, which can push the total well past the panel cost.
- Know your brand. If you can tell us the door is a Clopay, Amarr, Wayne Dalton, or Raynor, we can often confirm the panel is available before we come out. That cuts down on the diagnosis-then-return cycle that plagues generalist contractors.
- Get two or three real estimates. Not necessarily to shop for the cheapest, but to see whether a pro is quoting the panel, labor, and any track or spring work separately. Transparency is a good sign. A vague single number that seems too low usually becomes a bigger bill later.
- Ask about matching a whole side. If the door has visible panels and you’re replacing one, make sure a replacement is truly color- and profile-matched. A mismatched panel looks worse than the dent it replaced, and you don’t want to pay twice.
- Bundle if something else is failing. If the springs are near the end of their life or the rollers are grinding, handling them during the same visit can save a trip charge. Spring repair is $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair runs about twice that.
None of this costs anything to ask. Our estimates are free, and we’ll put the numbers in writing before you commit. Call (833) 842-9208.
Repair or Replace the Whole Door?
This is the question we hear most after a panel gets damaged. If the door is otherwise sound, one panel is usually the right call. If the door is old, the panels are showing rust or sag, the springs are worn, and the whole thing rattles on the way up, a full replacement at $700 – $2200 may last longer and cost less over a few years. We’ll look at the door and give you the honest comparison, not just the more expensive job.
When a Panel Isn’t the Whole Story
Sometimes a bent panel comes with a bent hinge or a slightly bowed track, and the door still operates but not correctly. A panel that looks fine can hide a hinge that’s pulling out of the door frame. That’s the kind of detail a specialist spots and a generalist might miss. Our technicians work exclusively on garage doors, so they know what to look for on a Clopay or LiftMaster door versus a legacy Craftsman setup. That matters when the damage is more than cosmetic.
If your door has a dent you can live with but is also getting harder to open, that’s worth checking out. Opener repair runs $120 – $320 if the motor is straining, and the strain is often caused by a stuck panel or track issue that keeps the door from rolling cleanly. We handle opener brands like LiftMaster, Chamberlain, Genie, and Craftsman along with the door itself, so you don’t get handed off to a second company.
Panel Replacement vs. a Related Service
A lot of Polaris homeowners call about a “broken door” when the real problem isn’t a panel at all. The panel looks bent because a cable snapped, a spring failed, or the track is out of line. Spring repair is $180 – $340 for one spring and is the most common culprit behind a door that suddenly won’t lift. Cable repair is $130 – $250. If the opener runs but the door doesn’t move, the opener repair range of $120 – $320 covers most of those cases.
If you’re not sure which service you need, describe what the door is doing and we’ll point you toward the right fix. Sometimes it’s a panel replacement problem, sometimes it’s panel replacement plus a small spring or cable job, and sometimes it’s a whole new door. We quote each one separately so you can see exactly where the money is going.
One safety note: garage door springs and cables are under very high tension. Panels are the cosmetic and structural skin of the door, but the springs and cables that lift it are the parts that cause serious injuries. Don’t try to take apart the spring or cable system yourself; that’s a job for a technician with the right tools. Panel swaps still involve removing hinges and possibly lifting the door off its track, so it’s not a weekend DIY project either.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Polaris?
Panel replacement in Polaris typically costs $250 – $500 for a single section, including the panel and labor. Standard steel panels on common brands come in near the low end. Carriage-house panels, windowed panels, and discontinued-model matches push toward the top. Call (833) 842-9208 for a free estimate and we’ll give you the number for your door. Estimates are free.
Is it cheaper to repair a panel or replace the whole door?
A single panel at $250 – $500 is cheaper than full door installation at $700 – $2200, so repair wins when the rest of the door is in good shape. Replacement makes more sense when the panels are rusted or sagging, the springs are worn, and the door is already at the end of its life. We’ll give you both numbers so you can decide. Call (833) 842-9208 for an honest comparison.
Can you replace a panel the same day?
Often yes, when the panel is in stock for your brand. For common Clopay, Amarr, Wayne Dalton, and Raynor doors, we frequently have the panel available, which means the job can be done in one visit. Older or discontinued models may need a special order, which adds time. Call (833) 842-9208 and we’ll tell you before we come out. Estimates are free.
Why does a bottom panel cost more to replace?
The bottom panel takes the most damage from moisture, road spray, snowmelt, and salt tracked in through Ohio winters, so it’s the section that rusts and dents first. Replacing it can reveal rust along the door’s lower edge or a hinge that needs attention, which is why it sometimes runs toward the higher end of the $250 – $500 range. A free estimate will confirm exactly what your door needs. Call (833) 842-9208.
Do you work on my door brand?
Very likely. We work on the industry’s most widely installed brands: Clopay, Amarr, Wayne Dalton, and Raynor for the doors themselves, and LiftMaster, Chamberlain, Genie, and Craftsman for the openers. Our technicians are trained on the specific hardware in your home, not learning on the job. Call (833) 842-9208 with your brand and model if you know it.
Get a Free Panel Replacement Estimate in Polaris
If a panel on your garage door is dented, bent, rusted, or just plain wrong-looking, don’t wait for the damage to spread to the track and rollers. Panel replacement in Polaris is a job a specialist can handle in one visit, with the right part and the right training, for typically $250 – $500. We stock parts for the major brands, so most jobs don’t turn into a diagnosis visit followed by a return trip. Our technicians have up to 11 years of experience, and they work on garage doors exclusively, which means they know your Clopay, Amarr, Wayne Dalton, or Raynor door and your LiftMaster, Chamberlain, Genie, or Craftsman opener. Call (833) 842-9208 for a free estimate, upfront pricing, and a same-day visit when the part is available. Few things are as frustrating as a garage door that won’t close, and a panel that fits right is the quickest path back to a door that works.
Pricing reflects the Polaris market as of 2026. Garage Door Repair Polaris offers free estimates – call (833) 842-9208.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Allen Kim"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Steve Whitaker"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Shannon Quinn